product
(empty)
No products
- > Print
- > View full size
Fumpa has been designed for accuracy and speed. Fantastic for wheelchair users and cyclists and pumping other small items e.g. sports balls.
The Fumpa Pump Standard is our most powerful and fastest pump. It is designed to replace your floor pump and has enough power to pump up to 6 tyres on a single charge. The Fumpa has a maximum pressure of 120psi. Expect Fumpa to fill a 700x23c from 0-100psi in around 25 seconds. This makes Fumpa roughly twice as fast as miniFumpa, and roughly 4 times faster than nanoFumpa.
Fumpa has been upgrades to USB Type-C to allow for 1 hour fast charge capabilities. We have also removed Fumpa's old nozzle and tube configuration to make it easier to connect to a tyre's valve. This direct connection ensures and easier pumping experience. If the pump is too big to fit between the spokes or you have diffuculty holding the pump against the valve then we recommend you purchase the extension nozzle (sold together or separately) from our store.
Fumpa accepts both Presta and Schrader valves. Fumpa comes with an in-built digital pressure gauge that reads the pressure inside the tyre in real time in psi, kPa or Bar units. Every Fumpa pump gauge is individually calibrated to ensure pressure accuracy for the user.
The Fumpa Pump Standard pum can also be used on motorbike tyres, wheelchair tyres and even the odd wheel barrow tyre, but please purchase the extension nozzle for this application.
Travelling with a Fumpa Pump:
The Fumpa Pump is also great for airline travel. If you are planning on going on a cycling holiday, don't take your floor pump, take Fumpa!
See our recomendations and links to flight information regarding travelling with a Fumpa and its lithium battery in the downloads... Travelling with a Fumpa.
Contents:
- 1 x Fumpa
- 1 x USB Type-C cable
- 1x Carry bag and 1x small zip lock bag
- 1 x manual
Fumpa Pump Features:
- Size: 1.7×2.9×3.5in. (42x73x87mm)
- Weight: 13.4 ounces (380 grams)
- 0-100psi: 20-25 seconds for a 700x23c tyre
- Max pressure: 120psi
- Digital readout: selectable between psi, kPa and Bar units. 3% accuracy
- Rechargeable Lithium-ion battery
Extension Nozzle Features:
- 1.0m hose rated to 38bar (550psi)
- Dual locking Presta/Schrader nozzle
- Elbow connector to mount nozzle to Fumpa Bike Pump
Charging Fumpa:
Charge Fumpa by connecting the supplied USB Type C cable to the USB Charge Port (see below). Connect the other end of the USB cable to a PC or USB wall charger (not supplied). The START/STOP button will glow red, indicating that Fumpa is connected to the charger. The button will glow red even when the pump is fully charged. Using a 5V, 2Amp supply, Fumpa should be recharged in 1 hour.
PLEASE NOTE:
- Never leave your pump charging unattended!
- Do not operate the unit while it is connected to a charger. Doing so can damage the battery! Always disconnect the USB charge cable before use.
- Counterfeit wall chargers pose a fire risk and can damage your pump!
- Only charge your pump using wall chargers purchased from reputable consumer electronics stores!
- Ensure your charger is marked with at least one of these symbols:
Changing the nozzle to accept Presta Valves:
Fumpa has been designed to accept both Presta and Schrader Valves:
When you receive your Fumpa the nozzle will be set up to accept Schrader valves. To accept Presta valves, unscrew the cap, remove the brass insert, flip the seal around and screw the cap back onto the nozzle:
Inflating a tyre:
Connect Fumpa to a tyre by pushing Fumpa's nozzle onto the tyre's valve.
-
Initially, the user may find that the seal inside Fumpa's nozzle feels tight around the valve. Over time, the seal will soften.
-
Push the nozzle onto the valve nice and hard. Over time, this process will become easier.
Once connected to the tyre, inflate the tyre by pressing and holding Fumpa's push button. Once the required pressure is reached, release the button. We recommend pumping your tyre by locating the tyre's valve near the top of the tyre and standing over the tyre. This method also works best for tubeless tyres as their is less chance in sealant getting into the pump. The maximum pressure of Fumpa is 120psi (830kPa or 8.3Bar). As shown in the video, once this pressure is reached, Fumpa will automatically turn off.Fumpa can be disconnected from the tyre’s valve by firmly pulling the nozzle away from the valve.
Reviews:
“A great answer to the mini-pump or CO2 cartridge, with fast, easy inflation guaranteed.”
– Mike Stead on miniFumpa, May 2019 @ road.cc
“A really easy way to get tyres of any size inflated, fast, saving the hassle of carrying/using a track pump.”
– Mike Stead on Fumpa, April 2019 @ road.cc
Warranty: The Fumpa and miniFumpa come complete with a twelve month warranty on all parts. We will repair possible faults free of charge within the warranty period, as long as the faults are caused by material defects or defective workmanship. Warranty claims should be addressed to info@c1south.co.nz
