product
(empty)
No products
- > Print
- > View full size
The Extension Nozzle is an adaptable nozzle for both Presta and Schrader valves.
Includes 1 metre of flexible air hose for convenience.
A great accessory for your home or car to easily top of the tyres on your wheelchair, bikes etc.
Please note that this nozzle can only be used with the Fumpa Pro.
What's included:
- 1m hose rated to 38 bar (550psi)
- Dual locking Presta/Schrader nozzle
- Elbow connector to mount nozzle to Fumpa Pro
Fumpa Pro is the gold standard of electric pumps:
Fantastic for wheelchair users and cyclists and pumping other small items e.g. sports balls.
This is the ultimate machine for your workbench. Hand-built in Australia around the tried and tested air compressor of the original Fumpa that started the whole 'electric inflator' movement back in 2015. But seriously evolved.
High-contrast OLED display for clear daylight visibility, built-in gauge zeroing for accurate readings to 0.1 psi every time, bigger battery for more power, ergonomic design features, tyre pressure presets in Bar, psi or kPa and user-serviceable batteries with replacement kits available from Fumpa.
The Fumpa Pro's battery is 36% larger than a Fumpa OG battery, giving the pump significantly more capacity in the same size machine. Enough 'oomph' to fully inflate 7 - 8 tyres per recharge, ridiculously fast, and with digital gauge accuracy down to the decimal point. In fact it can accurately read and display tyre pressures in 0.1 psi increments from 0.0 psi all the way up to 120 psi.
The Fumpa Pro comes with a convertible air nozzle which can be configured for Schrader, Presta or Clik valves. A range of optional connectors can also be purchased from Fumpa to connect the Fumpa Pro to a wide range of valve and wheel combinations.
The Fumpa Pro's rock-solid construction, hand-held size and serviceable design make it a core tool in many pro team tool kits. The new rubberised black caps on the pump's body make it easy to grab quickly and hold onto, and they help protect it from knocks and scrapes.
Use a Fumpa Pro at home for pre-ride tyre checks and tyre top-ups, for workshop maintenance including reseating tubeless tyres or when you travel to ride; carried in your backpack, even on planes.
Features
- Designed and engineered for home and professional bike mechanics
- For road, gravel, MTB and commuter cyclists
- For tubes or tubeless tyres
- High-contrast OLED display for clear visibility in bright sunshine
- Inflates 7 - 8 tyres per recharge
- 120 psi (8.3 Bar) maximum pressure
- Rubberised end caps for better grip and product protection
- Digital pressure gauge displays pressure in psi, kPa or Bar with decimal point accuracy to 0.1 psi from 0.0 psi to 120 psi
- 750mAh rechargeable battery is replaceable to extend product life, indefinitely
- Auto-zeroing pressure gauge for exceptional accuracy
- Built-in pressure recalibration program
- Standard nozzle included for Presta, Schrader and Clik valves
- Accessories and extension nozzles available from Fumpa
- Air-travel friendly
- USB-C fast charge in under an hour
- User-serviceable batteries, nozzle seals and body caps
Fumpa Pro pumps are hand-made in Melbourne, Australia.
Contents
When opening your new Fumpa’s box, you will find the following inside…
- 1 x Fumpa bike pump with an OLED screen
- 1x USB-C charging cable
- 1 x ziplock storage and carry case
- 1 x small resealable plastic bag to store the brass Schrader valve adapter
We strongly recommend keeping your Fumpa and it’s charging cable in the supplied carry bag when not in use.
Dimensions and weight:
Charging Fumpa:
Charge Fumpa by connecting the supplied USB Type C cable to the USB Charge Port (see below). Connect the other end of the USB cable to a PC or USB wall charger (not supplied). The START/STOP button will glow red, indicating that Fumpa is connected to the charger. The button will glow red even when the pump is fully charged. Using a 5V, 2Amp supply, Fumpa should be recharged in 1 hour.
PLEASE NOTE:
- Never leave your pump charging unattended!
- Do not operate the unit while it is connected to a charger. Doing so can damage the battery! Always disconnect the USB charge cable before use.
- Counterfeit wall chargers pose a fire risk and can damage your pump!
- Only charge your pump using wall chargers purchased from reputable consumer electronics stores!
- Ensure your charger is marked with at least one of these symbols:
Changing the nozzle to accept Presta Valves:
Fumpa has been designed to accept Presta, Schrader and Clik Valves:
Inflating a tyre
We recommend positioning your tyre’s valve at the vertical top (12 o’clock) by rotating the wheel before inflating. This position will keep the weight of the bike bearing against Fumpa’s nozzle and also will minimise the risk of sealant entering Fumpa’s nozzle should you be using tubeless tyres. To further reduce this risk, please wait for a minute following tyre rotation before connecting Fumpa, this allows the sealant to drain down away from the valve.
Connect Fumpa to your tyre by pushing Fumpa's nozzle firmly onto the tyre's valve, creating an airtight seal. You may find that the seal inside a new Fumpa's nozzle feels tight around the valve. The seal will soften with use and over time, this will become easier.
Following inflation, Fumpa should be disconnected from the tyre’s valve by firmly pulling the nozzle directly away from the valve.
Note: The maximum pressure Fumpa can pump is 120psi (830kPa or 8.3Bar). If this pressure is reached, Fumpa will automatically stop pumping.
Temperature
Fumpa is miniature air compressor and can generate considerable noise and heat whilst operating.
During normal use Fumpa may become warm to touch. Fumpa is not a toy, it is a tool. It is fitted with an internal temperature sensor and if critical temperatures are reached, Fumpa will stop operating temporarily and a message will be displayed on the OLED screen that Fumpa needs to cool down before continuing. This will avoid your pump overheating and being damaged.
Warranty: The Fumpa Pro, miniFumpa and Nano fumpa come complete with a twelve month warranty on all parts. We will repair possible faults free of charge within the warranty period, as long as the faults are caused by material defects or defective workmanship. Warranty claims should be addressed to [email protected]
